Choosing A Connection - Samsung DVD-S127 User Manual

Choosing a Connection

The following show examples of connections commonly used to connect the DVD player with a
TV and other components.
Before Connecting the DVD Player
• Always turn off the DVD player, TV, and other components before you
connect or disconnect any cables.
• Refer to the owner's manual of the additional components you are connecting for
more information on those particular components.
Connection to an Audio System
Method 1
Method 2
2ch Amplifier 5.1ch Analog Amplifier
Audio Input Jacks Audio Input Jacks
R L
Front (RH) Front (LH)
Rear (RH) Rear (LH)
R2 L2
R SURROUND L S/W
R1 L1 R FRONT L CENTER
Mixed Audio Out
Analog Audio Out
MIXED AUDIO OUT
20
Method 3
Dolby Digital Decoder
Digital Audio Input Jacks
Center
Subwooper
OR
Digital Audio Out
ENG
Connection to a TV (For Video)
TV (Normal, Widescreen, Projection, etc..)
Basic Audio
TV
AUDIO
MIXED AUDIO OUT
R2
DVD
R1
Audio Output Jacks
• Method 1 DVD Player + TV with Video Input Jack
• Method 2 DVD Player + TV with S-Video Input Jack
(If S-Video is selected in the VIDEO OUT SELECT.)
• Method 3 DVD Player + TV with Component Video Jacks
(If Y, Pb or Pr is selected in the VIDEO OUT SELECT.)
DVD
NOTE
• If Y, Pb or Pr is selected, S-Video will not work.
• If S-Video is selected, Y, Pb or Pr will not work.
ENG
Choosing a Connection
Method 1 Method 2
Good picture Better picture
S-Video
AV Cable Video Cables
Cable
OR OR
L2
1
L1
Video Output Jack S-Video Jack
Method 3
Best picture
Component Video
Jacks
21