Choosing A Connection - Samsung DVD-C5050N User Manual

Choosing a Connection

The following show examples of connections commonly used to connect the DVD player
with a TV and other components.
Before Connecting the DVD Player
• Always turn off the DVD player, TV, and other components before
you connect or disconnect any cables.
• Refer to the owner's manual of the additional components you are
connecting for more information on those particular components.
Connection to an Audio System
Method 1
AUDIO
SYSTEM
2ch Amplifier
Audio Input Jacks
DVD
PLAYER
Analog Audio Out
12
Method 2
Dolby Digital Decoder
Digital Audio Input Jack
OR
Digital Audio Out
Connection to a TV (For Video)
TV (Normal, Widescreen, Projection, etc..)
Method 1
Good
Basic Audio picture
TV
AV Cable
DVD
PLAYER
Audio Output Jacks Video Output Jack
DVD Player + TV with Video Input Jack
Method 1
(The VIDEO OUT SELECT switch must be set to the S-VIDEO position.)
DVD Player + TV with S-Video Input Jack
Method 2
(The VIDEO OUT SELECT switch must be set to the S-VIDEO position.)
DVD Player + TV with Component Video Jacks
Method 3
(The VIDEO OUT SELECT switch must be set to the COMPONENT position.)
NOTE
• If COMPONENT is selected, S-VIDEO will not work.
• If S-VIDEO is selected, COMPONENT will not work.
Choosing a Connection
Method 2 Method 3
Better Best
picture picture
Video
S-Video
Cable Cables
OR
OR
COMPONENT COMPONENT
VIDEO OUT VIDEO OUT
SELECT SELECT
S-VIDEO S-VIDEO
Component Video Jacks
S-Video Jack
13