Selecting a Ringer Type for an Entry
You can assign a ringer type to a Contact entry so you can
identify the caller by the ringer type. (See "Ringer Types"
on page 46.)
To select a ringer type for an entry:
1.
Display a Contact entry.
2.
Press Edit (
3.
Select (
4.
Press the navigation key left or right to select the
desired ringer category (Default, Single Tones, Ring
Tones, or Melodies), then press the navigation key
down to highlight the ringer field.
5.
Press the navigation key left or right to scroll through
available ringers. (When you highlight a ringer type, a
sample ringer will sound.)
6.
Select your desired ringer and press
7.
Press Done (
108
).
) and press
) to save the new ringer type.
.
Section 2G: Using Contacts
.