Table of Contents
Advertisement
Menu functions
UMTS: the phone operates in UMTS (3G
network) networks. You can get a higher speed
quality than on lower generation networks, and
use advanced data and information services,
such as video calls.
•
Preferred networks: select the preferred
network you want to use. You can edit the
network list.
Connections
(Menu 3.6.4)
You can set up information about your network
connection. In most cases, you don't need to change
the settings. In case of problems, please contact
your service provider.
Creating a connection profile
1. Press <New>. If a profile has already been
saved, press <Options> and select New.
2. Specify each information.
•
Set name: edit the name of the network
setting.
•
Access name: edit the access point name
used for the address of the GPRS network
gateway.
•
Auth type: choose the type of
authentication used.
•
User ID: edit the server login ID.
•
Password: edit the server password.
42
•
Protocol: select the protocol from between
WAP, HTTP, and Other.
•
Home URL: enter your homepage address.
•
Proxy address/Port: (for the HTTP
protocol) set the proxy server address and
port.
•
Gateway address: (for the WAP protocol)
set the gateway address.
•
Secure connection: (for the WAP protocol)
turn the secure mode on or off.
•
Linger time (sec.): set a time period after
which the network is disconnected if there
has been no new data traffic in that time.
•
Advanced settings: provide you with the
following options:
Static IP: specify if you want to manually
enter an IP address; see the Local phone IP
option. If you want the IP address to be
automatically assigned by the server, remove
the check mark.
Local phone IP: enter the IP address
obtained from the network operator, if you
checked the Static IP option.
Static DNS: specify if you want to manually
enter the DNS (Domain Name Server)
address; see the Server 1/2 option. If you
want the address to be automatically
assigned by the server, remove the check
mark.
Advertisement
Table of Contents
