Samsung SGH-V200C User Manual page 12

Getting Started
1. Insert the battery into the charger, ensuring that
the terminals on the battery are in contact with
those on the charger. Press the battery down
until it clicks into place.
2. Plug the connector of the travel adapter into the
jack at the bottom of the charger.
3. Plug the adapter into a standard AC wall outlet.
The LED on the charger will indicate the
charging progress with the following colours:
• Red: the battery is charging.
• Green: the battery is completely charged.
• Yellow: the battery is not correctly plugged in
or operating in a too high or too low
temperature.
20
4. When charging is finished, unplug the adapter
from both the power outlet and the charger.
5. Take the battery out of the charger.
Using the Travel Adapter
The travel adapter allows you to use the phone
while the battery is charging, but this will cause the
phone to charge more slowly.
1. With the battery in position on the phone, plug
the connector of the travel adapter into the
bottom of the phone.
2. Plug the adapter into a standard AC wall outlet.
Getting Started
21