Getting Started; Starting The Wap Browser; Exiting The Wap Browser - Samsung SGH-Q100 User Manual

S S e e t t t t i i n n g g U U p p t t h h e e W W A A P P B B r r o o w w s s e e r r
When the bearer is set to Data
Parameter Description
Login Name PPP server login ID.
Password PPP server password.
Dial-up Number PPP server phone number.
Data Call Type Data call type: Analogue or
ISDN.
When the bearer is set to GPRS
Parameter Description
User Name User ID required to connect to
the GPRS network.
Password Password required to connect to
the GPRS network.
APN Access point name used for the
address of the GPRS network
gateway.
Note: The WAP Browser settings may vary,
depending on the service provider. Contact
your service provider for further information.
3. When you are satisfied with each parameter, press
the Select or OK soft key.
4. When you have finished configuring the WAP
Browser, press the
8
key.

Getting Started

Starting the WAP Browser

Note: The first time you use the WAP Browser, you are
guided through a security setup procedure that
takes three to five minutes. Follow the on-screen
prompts to complete the procedure (only
necessary the first time you access the service).
To start the WAP Browser when the idle screen is
displayed, press the key or press the Menu soft key,
followed by the and
TUV
A connection is established with your service provider and
the corresponding homepage is displayed.
The content of the WAP Browser startup homepage
depends on your Wireless Web service provider. To
scroll through the screen, use the
Note: To access the startup homepage from any other
screen in the WAP Browser, use the Home option.
For more information on the WAP Browser
menus, refer to page 12.

Exiting the WAP Browser

To exit the browser at any time, simply press the
key or press and hold down the
keys.
and keys.
key.
9 9