Table of Contents
Advertisement
Entering information
Writing on the screen
1. Tap Menu → Draw to switch to the
Writing mode. This displays lines on the
screen to help you write.
2. Write within the two ruled lines on the
screen.
3. Tap Menu and then Tools → Recognize.
4. If you want to convert only certain words,
deselect Draw from the Menu option
and select the word. Then, select Draw
again and tap Tools → Recognize on the
Menu option. Or, tap and hold the
selected words and then tap Recognize
on the pop-up menu. If a word is not
recognised, it is left as writing.
5. If the conversion is incorrect, you can
select different words from a list of
alternatives or return to the original
writing. To do so, tap and hold the
incorrect word (tap one word at a time).
On the pop-up menu, tap Alternates...
42
A menu with a list of alternate words
appears. Tap the word you want to use,
or tap the writing at the top of the menu
to return to the original writing.
You can also cancel recognition by
tapping Menu → Undo Recognize. Your
input returns to the original writing.
Tips for getting good recognition
• Write neatly.
• Write on the lines and let descenders,
e.g., the tails of a g or a q, go below the
line. Write the cross of the "t" and
apostrophes below the top line so that
they are not confused with the word
above. Write periods and commas above
the bottom line.
• For better recognition, try increasing the
zoom level to the maximum using the
Menu → Zoom menu.
• Write the characters of a word closely and
leave big gaps between words so that the
phone can easily tell where words begin
and end.
Advertisement
Table of Contents
