Table of Contents
Advertisement
3.
Insert the end of the operator-presence bail into
the handlebar, squeeze the other leg of bail
slightly, and insert the bail into the handlebar
(Figure
11).
Installing the Electric-Start Switch
1.
Insert the push-in fastener into the hole in the
upper handlebar as shown in
Figure 12
1. Hole (upper handlebar)
2.
Above the push-in fastener, assemble the
electric-start switch onto the handlebar
13).
Figure 11
Figure
12.
2. Push-in fastener
1. Pan-head screw
2. Electric-start switch
3. Upper handlebar
g367358
4. Cable (operator-presence
bail)
3.
Align the cable for the operator-presence bail
to the upper cable groove of the electric-start
switch.
4.
Align the cable clamp to the cable and switch.
5.
Secure the clamp, cable, and switch to the upper
handlebar with the pan-head screw, washer, and
locknut.
g367912
(Figure
11
Figure 13
5. Cable clamp
6. Washer
7. Locknut
g367911
Advertisement
Table of Contents
