Table of Contents
Advertisement
Account name: enter a name for the currently
selected account.
User name: enter a name to be displayed as the
sender's name in your outgoing e-mails.
Email address: enter your e-mail address.
Reply address: enter the e-mail address to which
you want recipients to send reply messages.
User ID: enter your e-mail ID.
Password: enter your e-mail password.
SMTP server: enter the IP address or domain
name of the outgoing e-mail server.
SMTP port: enter the SMTP port number.
Protocol type: select the protocol for the
incoming e-mail server. The remaining options
depend on the protocol type setting.
When the protocol type is POP3:
POP3 server: enter the IP address or domain
name of the server that receives your e-mail.
POP3 port: enter the POP3 port number.
APOP login: connect to the server by using the
APOP login scheme when this option is selected.
When the protocol type is IMAP4:
IMAP4 server: enter the IP address or domain
name of the server that receives your e-mail.
IMAP4 port: enter the IMAP4 port number.
Include attachments: select this option to
receive attachments with e-mails.
Max. Email retrieved: set the number of headers
you will retrieve from the server.
Email profile: configure the network settings
required to send or receive e-mails.
You cannot change e-mail profile settings while an
e-mail is being sent or retrieved.
•
Current profile: select a profile.
•
Profile settings: configure up to five e-mail
profiles. For each profile, the following options are
required to connect to the GPRS network:
Profile name: enter a name for the e-mail profile.
APN: enter the access point name used for the
GPRS network address.
Login ID: enter the user ID.
65
Advertisement
Table of Contents
