Table of Contents
Advertisement
Menu functions
•
Ring tone: select a ring tone for the call ringer.
•
Volume: select a ringer volume.
•
Alert type: specify how you are to be informed of
incoming calls.
Melody: the phone rings using the selected ring
tone.
Vibration: the phone vibrates but not rings.
Vibration then melody: the phone vibrates three
times and then starts ringing.
Keypad tone
(Menu 9.4.2)
Use this menu to select the tone that the phone
sounds when you press a key.
You can adjust the keypad tone volume using
[ / ] in Idle mode.
Message tone
(Menu 9.4.3)
Use this menu to set up the ringer for incoming
messages and e-mails.
•
Tone: select one of several message tones.
•
Alert type: specify how you are to be informed of
any incoming messages.
84
•
Repetition: specify how often the phone informs
you of a new message.
Power on/off
(Menu 9.4.4)
Use this menu to select the melody that the phone
sounds when it is switched on or off.
Folder tone
(Menu 9.4.5)
Use this menu to select the tone that the phone
sounds when you open or close the phone.
Quiet mode
(Menu 9.4.6)
Use this menu to set how the phone acts to alert you
to a specific event in Quiet mode, instead of making
sounds.
•
Vibration: set the phone to vibrate.
•
Mute: mute all sound settings.
Extra tones
(Menu 9.4.7)
Use this menu to customise additional tones for the
phone.
•
Minute minder: set the phone to beep every
minute during an outgoing call to keep you
informed of the length of your call.
Advertisement
Table of Contents
