Using Chinese Stroke Mode - Samsung SGH-E728 User Manual

Enter text
1. Press [ ] to add the word or the phase you want
to the PTI dictionary.
2. Enter the word or the phase you want.
3. Press the left soft key to insert it into your text.

Using Chinese Stroke mode

This mode allows you to enter individual Chinese
strokes, in written order, from top to bottom, and from
left to right.
The Chinese strokes are classified into five basic
categories; heng, shu, pie, dian, and zhe. The basic
strokes are printed on keys [1] to [5] on the keypad.
Refer to the following table:
Category Keys Strokes represented in each category
24
Entering strokes and characters in Stroke
mode
1. Press the keys that correspond to a character's
component strokes. Press keys in the order that
you would write the strokes, using one press per
stroke.
Example: To enter "
and [3] to enter " ."
2. Press [Up] or [Down] to scroll through the choices.
If you are uncertain of the stroke order, press [6] in
place of each questionable stroke. Continue
entering strokes until the character displays or until
you finish the character.
3. To select a character and add it to your message,
press the corresponding key, [7] to [ ].
Rapid character entry
Try entering the characters "zhong guo (
the following keystrokes: [2], [0], and [7]. Even
though "zhong guo (
character, your phone allows you to enter the
complete pair in only three key presses.
," press [5] to enter "
)" using
)" is a twelve stroke
"