NEC P502W User Manual page 29

9. After completing required settings, focus on [OK] and press the ENTER button.
Back to the [SECURITY] page.
10. Focus on [OK] and press the ENTER button.
This will complete setting [PEAP-MSCHAPV2] for [EAP TYPE] in [WPA2-EAP].
TIP:
Clearing the digital certificate that is installed on the projector
To clear the digital certificate installed on the projector, follow the steps below.
By doing the following procedure, all the digital certificates for the currently displayed profile will be cleared.
1. Focus on [CLEAR CERTIFICATES] in the bottom left of the [ADVANCED] setting screen and press the
ENTER button.
A message for confirmation will be displayed.
2. Focus on [YES] and press the ENTER button.
The digital certificates will be cleared.
29
7. NETWORK SETTINGS