Advertisement
Troubleshooting
PROBLEM
Odors permeate in the
room during operation.
The air conditioner
makes a bubbling
sound.
Water is dripping from
the air flow blades.
Remote control is not
working.
The air conditioner
does not turn on or off
with the wired remote
control.
The wired remote
control does not
operate.
The indicators of the
digital display flashes.
16
• Check if the appliance is running in a smoky area or if there is a
smell entering from outside. Operate the air conditioner in Fan
mode or open the windows to air out the room.
• A bubbling sound may be heard when the refrigerant is
circulating through the compressor. Let the air conditioner
operate in a selected mode.
• When you press the Power button on the remote control, noise
may be heard from the drain pump inside the air conditioner.
• Check if the air conditioner has been cooling for an extended
period of time with the air flow blades pointed downwards.
Condensation may generate due to the difference in
temperature.
• Check if your batteries are depleted.
• Make sure batteries are correctly installed.
• Make sure nothing is blocking your remote control sensor.
• Check that there are strong lighting apparatus near the air
conditioner. Strong light which comes from fluorescent bulbs or
neon signs may interrupt the electric waves.
• Check if you set the wired remote control for group control.
• Check if TEST indicator is displayed on the wired remote control.
If so, turn off the unit and switch off the circuit breaker. Call your
nearest contact center.
• Press the Power button on the remote control to turn the unit
off and switch the circuit breaker off. Then, switch it on again.
SOLUTION
Advertisement
