Selecting The External Component To Use - JVC KS-FX270 Instructions Manual

Hide thumbs Also See for KS-FX270:

Table of Contents

Available languages

Selecting the external component to use

You can connect the external component to the CD changer jack on the rear using the Line

Input Adaptor KS-U57 (not supplied).

To use the external component as the playback source through this receiver, you need to

select which device — CD changer or external component — to use. When shipped from the

factory, CD changer is selected as the external component.

LINE IN:

To use the external component other than CD changer

CHANGER: To use the CD changer

Note:

• For connecting the Line Input Adaptor KS-U57 and the external component, refer to the

Installation/connection Manual (separate volume).

2,5

Change the source to FM, AM or TAPE.

Press and hold SEL for more than 2 seconds.

"CLOCK H", "CLOCK M", "SCM LINK", "LEVEL", "B.SKIP"

or "EXT IN" appears on the display.

Select "LINE IN" if not shown on the display.

Select the desired mode — "LINE IN" or

"CHANGER".

Finish the setting

Table of Contents

Table of Contents