Advertisement
Quick Links
Advertisement
Related Manuals for NAVAC NTF67D
Summary of Contents for NAVAC NTF67D
- Page 1 Hand and Drill-Powered Flaring Tool NTF67D User Manual SAVE THIS MANUAL FOR FUTURE REFERENCE...
- Page 2 PREPARATION CONTENTS - Make sure flaring cone is at the upper most position by turning flaring yoke counterclockwise. PREPARATION - Turn tension rod counterclockwise until it is backed away from the inner chamber of the flaring Flaring Yoke OPERATING INSTRUCTIONS (DRILL DRIVEN) body.
- Page 3 OPERATING INSTRUCTIONS (MANUAL) 5. Close flaring bar and move the flaring body Flaring Yoke positioned over the tubing. It should click. Assembly 6. Tighten tension rod. 1. Make sure the flare handle is properly installed on the flare body. Flaring Tension Rod Handle Arrow...
- Page 4 Flaring Cone APPLICATION 7. Turn the flare handle clockwise and continue until the clutch engages (clicking). Model NTF67D Tubing O.D. 3/16", 1/4", 5/16", 3/8", 1/2", 5/8", 3/4" Accessory Carry Case, NFG1 Flare Gauge 8. Turn the flare handle counterclockwise until the upper position of the flaring cone is reached and the clutch engages (clicking).