Table of Contents
Advertisement
10. HANDLING RADIO CONTROL
10. HANDLING RADIO CONTROL
To ensure that the radio control operations can be carried out safely, they must be carried out in the following
order. If this order is not followed, the radio control cannot be operated, so be sure that you fully understand the
correct order before operating.
Checks before starting
Set radio control/on-board selector
switch to RADIO CONTROL
Set fuel control dial inside cab to MIN position
Turn starting switch ON
Set parking lever on left side of operator's seat to
FREE position (raised)
Transmitter power ON
Start engine
Start radio control operation
Radio control operation
Emergency stop, radio control power OFF
Set parking lever to LOCK position (lowered)
Turn starting switch OFF (on machine)
Set radio control/on-board selector switch to ON-BOARD
Checks after finishing
3-16
(Turn switch on
machine to ON position)
On-board
operation
1
2
1
When this is done, the spee
range display on the monito
panel shows "PR".
2
When this is done, the spee
range display on the monito
panel shows "NR".
3
When this is done, the engi
stops.
On-board
operation
OPERATION
Advertisement
Table of Contents
