Table of Contents
Advertisement
3. While the Zoom edit screens are great for patch editing,
the Rhythm Edit screen is best for rhythm set editing, so
press F6 (Pro Edit) to display it.
To select a specific drum key for editing, play it. Use the pads
when you're editing a rhythm set intended for use on the
pads to ensure that they respond the way you want. If
the rhythm set will be played on the keyboard, use the
keyboard for editing.
To learn about Zoom editing, see the Sounds of the Fantom-X Workshop
booklet.
The top-center of the Rhythm Edit screen shows the currently
selected drum key, identified by both note number and
name.
During editing, keep an eye on the drum key's note number/name to make
sure you're changing settings for the right drum key.
Changing a Drum Key's Sound
Since a drum key is made up of its waves, you change its sound
by selecting the desired waveforms or samples for each wave
and adjusting the waves' parameters to taste.
Activating and Selecting Waves
Press F8 (Wave Sw/Sel) to display the Wave Sw/Wave Select
window.
•
To turn each of the four waves on or off—press the desired
F1-F4 button. When a wave is active, its button lights
yellow onscreen.
•
To edit a wave's parameters—press the corresponding
F5-F8 button. When a wave's selected for editing, its
button turns red. To edit the parameters of multiple waves
simultaneously, press their F buttons at the same time.
To return to the drum key parameters, press EXIT.
The Drum Key Parameters
The drum key parameters are arranged in sections from top
to bottom on the Fantom-X display. To move from section to
section, press F2 (↓) and/or F1 (↑). To edit a parameter within
the selected section, press 5 or 6 to highlight it, and then
turn the VALUE dial to adjust its setting.
What's in Each Parameter Section
Your Owner's Manual—starting on Page 87—provides more
details than we have room for in this booklet, but here's a
general overview to get you started.
Advertisement
Table of Contents
