Table of Contents
Advertisement
7. If a blackout occurs while the oven is already in operation,
an automatic system within the appliance will reactivate the
cooking mode from the point at which it was interrupted,
provided that the temperature has not dropped below a
certain level. Programmed cooking modes which have not
yet started will not be restored and must be reprogrammed
(for example: a cooking mode has been programmed to
start at 20:30. At 19:30 a blackout occurs. When the power
supply is restored, the mode will have to be reprogrammed).
! There is no preheating stage for the GRILL mode.
! Never put objects directly on the bottom of the oven; this
will prevent the enamel coating from being damaged.
! Always place cookware on the rack(s) provided.
Cooling ventilation
In order to cool down the external temperature of the oven, a
cooling fan blows a stream of air between the control panel and
the oven door, as well as towards the bottom of the oven door.
At the beginning of the FAST CLEAN mode, the cooling fan
operates at low speed.
! Once cooking has been completed, the cooling fan continues
to operate until the oven has cooled down sufficiently.
Oven light
The light comes on when the oven door is opened or when
a cooking mode starts.
The
button can be used to switch on the light at any time.
Residual heat indicators
The appliance is fitted with a residual heat indicator. When
the oven is off, the "residual heat" bar on the display lights
up to indicate high temperatures inside the oven cavity. The
individual segments of the bar switch off one by one as the
temperature inside the oven falls.
Demo mode
The oven can operate in the DEMO mode: all heating
elements are deactivated, and the controls remain operative.
To activate DEMO mode, press and release button
then buttons
and
then press and release button
the TEMPERATURE display shows "dEon".
To deactivate DEMO mode, when the oven is off press and
hold button
and button
A buzzer sounds and the "dEoF" message disappears from
the display.
Restoring the factory settings
The oven factory settings can be restored to reset all
selections made by the user (clock and customised
durations). To carry out a reset, switch off the oven, then
press and hold the button corresponding to the first manual
cooking mode (top left) and the
for 6 seconds. Once the restore procedure is complete, a
buzzer will sound. The first time the
oven will behave as if it is being switched on for the first time.
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24
simultaneously for 6 seconds, and
. A buzzer sounds and
simultaneously for 3 seconds.
button simultaneously
button is pressed, the
Standby
This product complies with the requirements of the latest
European Directive on the limitation of power consumption
of the standby mode. If no buttons are pressed for 30
minutes and the control panel/door lock has not been
activated, the appliance automatically reverts to standby
mode. Standby mode is indicated by the high luminosity
"Clock button" light. As soon as interaction with the machine
resumes, the system's operating mode is restored.
Modes
! In order to guarantee wonderfully soft and crunchy
foodstuffs, the oven releases – in the form of water vapour -
the humidity naturally withheld in the food itself. In this way,
optimal cooking results can be achieved for all types of food.
! Every time the oven is switched on, it suggests the first
manual cooking mode.
Manual cooking modes
! All cooking modes have a default cooking temperature
which may be adjusted manually to a value between
30°C and 250°C as desired (300°C for GRILL mode). Any
temperature adjustments will be stored in the appliance
memory and suggested again the next time this mode
is used. If the selected temperature is lower than the
temperature inside the oven, the text "Hot" appears on the
TEMPERATURE display. However, it will still be possible
to start cooking.
MULTILEVEL mode
All heating elements and the fan are activated. Since the
heat remains constant throughout the oven, the air cooks
and browns food in a uniform manner. A maximum of two
racks may be used at the same time.
BARBECUE mode
,
The top heating element is activated. The high and direct
temperature of the grill is recommended for food which
requires a high surface temperature. Always cook in this
mode with the oven door closed (see "Practical cooking
advice").
FAN GRILLING mode
The top heating element is activated and the fan begins to
operate. During part of the cycle the circular heating element
is also activated. This combination of features increases the
effectiveness of the unidirectional thermal radiation provided
by the heating elements through the forced circulation of
the air throughout the oven.
This helps prevent food from burning on the surface and
allows the heat to penetrate right into the food. Always
cook in this mode with the oven door closed (see "Practical
cooking advice").
GB
7
Advertisement
Table of Contents
