Download Print this page

Hotpoint SX 838 C 0 X Operating Instructions Manual page 5

Advertisement

Power cable supply connection to the electrical mains:
We recommend you use a power supply cable which is long enough to allow
you to take the oven out of its recess in the event of maintenance operations
(only use HAR - H05 - VV-F quality cables fitted with a plug conforming to
the regulations in force.
The plug must be accessible at all times.
Unplug the appliance before all operations, even when replacing the
oven lamp.
Using the appliance without correct earthing is highly dangerous.
! After connecting the appliance to the flexible cable, tighten all the
screws on the terminal board.
APPLIANCE SPECIFICATIONS
width 43,5 cm
Dimensions*
height 32,4 cm
depth 41,5 cm
Volume*
59 lt.
width 45,5 cm
Dimensions**
height 32,4 cm
depth 41,5 cm
Volume**
62 lt.
voltage: 230-240V~ 50Hz or 50/60Hz
Electrical
maximum power absorbed
connections
2800-3000W
EU Directive no 65/2014
supplementing Directive 2010/30/EU.
EU Regulation no 66/2014
implementing Directive 2009/125/EC.
Standard EN 60350-1,
Energy
Standard EN 50564
Label e
Ecodesign
Energy consumption for Natural
convection – heating mode:
Traditional
Declared energy consumption for
Forced convection Class – heating
mode: Baking.
This appliance conforms to the
following European Economic
Community directives:
- 2006/95/EC dated 12/12/06 (Low
Voltage) and subsequent amendments.
- 2004/108/EC dated 03/05/89
(Electromagnetic Compatibility) and
subsequent amendments.
- 93/68/EEC dated 22/07/93 and
subsequent amendments.
- 2012/19/EU and subsequent
amendments.
- 1275/2008 standby/off mode.
* Only for models with drawn rails.
** Only for models with wire rails.
GB
5

Advertisement

loading