Related Manuals for Hyundai HMP1318
Summary of Contents for Hyundai HMP1318
- Page 1 JACKHAMMER HMP1318 ORIGINAL INSTRUCTIONS WARNING: Read thoroughly the instruction manual before use...
-
Page 2: Table Of Contents
CONTENT 1. GENERAL POWER TOOL SAFETY WARNINGS ..............3 2. DESCRIPTION ........................6 3. SPECIFICATIONS........................6 4. OPERATION ........................7 5. EXPLOSIVE VIEW........................9 6. DISPOSAL...........................10 7. CE DECLARATION......................11 8. WARRANTY..........................12 9. PRODUCT FAILURE......................13 10.WARRANTY EXCLUSIONS....................14... -
Page 3: General Power Tool Safety Warnings
1. GENERAL POWER TOOL SAFETY WARNINGS WARNING Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term "power tool" in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool. - Page 4 4) Power tool use and care a) Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed. b) Do not use the power tool if the switch does not turn it on and off.
- Page 5 - When working with the machine, always hold it firmly with both hands and provide for a secure stance. - During pauses in the work, when not in use or during work on the machine itself (e.g., changing of the working tools, repairs, cleaning, adjustment), pull the mains plug. - Persons under 16 year of age are not permitted to operate this machine.
-
Page 6: Description
2. DESCRIPTION 1. Chuck 2. Side handle 3. Oil Cover 4. Switch 5. Motor house 6. Anti-vibration sleeve 3. SPECIFICATIONS Demolition Hammer Input Power 1300 W Voltage 230-240 V˜ 50 Hz Impact Rate 42 00 CPM Impact Force Tool Mounting SDS MAX Weight (without accessory) 5.3kgs... -
Page 7: Operation
4. OPERATION A. Install-Remove Accessories The tool must be turned off and unplugged when assembling the chisel / drill bit. Install the appropriate chisel or drill according to the intended operation. - Pull and hold the chuck backwards. - Insert the chisel / drill into the chuck of the tool. - Adjust the position of the groove by turning the drill bit and insert the accessory completely into the tool. - Page 8 Caution: 1. Do not grease more than 30 g; otherwise the tool will not function properly. 2. It is recommended that the tool with gears be regressed with a special gear lubricant. Other lubricants will harm the tool. Lubricants for hammer can be bought in specialized stores F.
-
Page 9: Explosive View
5 . EXPLOSIVE VIEW... -
Page 10: Disposal
6. DISPOSAL Electrical products should not be discarded with household products. According to the European Directive 2012/19/EU on waste electrical and electronic equipment and its implementation into national law, electrical products used must be collected separately and disposed of at collection points provided for this purpose. Talk with your local authorities or dealer for advice on recycling. -
Page 11: Ce Declaration
BUILDER SAS ZI, 32 RUE ARISTIDE BERGES – 312070 CUGNAUX – FRANCE Declares that the machinery designated below: JACKHAMMER Model: HMP1318 Serial number: 20211219374-20211221173 Complies with the provisions of the Directive « machinery » 2006/42/EC and national laws transposing it:... -
Page 12: Warranty
8. WARRANTY WARRANTY The manufacturer guarantees the product against defects in material and workmanship for a period of 2 years from the date of the original purchase. The warranty only applies if the product is for household use. The warranty does not cover breakdowns due to normal wear and tear. The manufacturer agrees to replace parts identified as defective by the designated distributor. -
Page 13: Product Failure
9. PRODUCT FAILURE WHAT TO DO IF MY MACHINE BREAKS DOWN? If you bought your product in a store: a) Empty the fuel tank if your product has one. b) Make sure that your machine is complete with all accessories supplied, and clean! If this is not the case, the repairer will refuse the machine. -
Page 14: Warranty Exclusions
10. WARRANTY EXCLUSIONS THE WARRANTY DOES NOT COVER: • Start-up and setting up of the product. • Damage resulting from normal wear and tear of the product. • Damage resulting from improper use of the product. • Damage resulting from assembly or start-up not in accordance with the user manual. •...