Mechanical and Dismantling Instructions
Dismantling Instruction
Step5: Dismantling Loader, disconnect the 3 connectors (XP5, XP8, XP9) aiming in the below figure, and remove 1 screw that
connects the loader and the bottom cabinet. (Figure 5)
Step6: Dismantling Power & Front Control Board, remove 3 screws on the board. (Figure 5)
Step7: Dismantling Main Board.Remove 1 screw on the board. (Figure 5)
2-3
Detailed information please refer to the model set.
XP5
XP9
XP8
Figure 5
XP3