Table of Contents
Advertisement
26
System Setting
[LANGUAGE] menu
Display Menu
Select a language for the [Settings] menu and on-
screen display.
Disc Menu / Disc Audio /
Disc Subtitle
Select the language you prefer for the audio track
(disc audio), subtitles, and the disc menu.
[Original]
Refers to the original language in which the
disc was recorded.
3
[Other]
Press ENTER (b) to select another language.
Use number buttons then press ENTER (b)
to enter the corresponding 4-digit number
according to the language code list on page
66.
[Off] (Disc Subtitle only)
Turn off Subtitle.
,
Note
Depending on the disc, your language setting
may not work.
[AUDIO] menu
Each disc has a variety of audio output options. Set
the player's Audio options according to the type of
audio system you use.
,
Note
Since many factors affect the type of audio
output, see "Audio Output Specifications" on
page 64 for details.
Digital Output
[Auto]
Select if you connect this unit's HDMI OUT
jack to a device with LPCM, Dolby Digital,
Dolby Digital Plus, Dolby TrueHD, DTS, DTS-HD
decoder or digital decoder.
[PCM]
Select if you connect this unit's HDMI OUT jack
to a device with digital decoder.
[DTS Re-Encode]
Select if you connect this unit's HDMI OUT jack
to a device with DTS decoder.
,
Note
y When [Digital Output] option is set to
[Auto], the audio may output as bitstream.
If the bitstream information is not detected
from HDMI device with EDID, the audio may
output as PCM.
y If the [Digital Output] option is set to [DTS
Re-Encode], the DTS Re-Encode audio is
outputted for BD-ROM discs with secondary
audio and the original audio is outputted for
the other discs (like [Auto]).
y This setting is not available on the input
signal from an external device.
y If [Audio Guidance] is set to [On], the audio
is output in PCM without reference to
[Digital Output] option.
Advertisement
Table of Contents
