Sony BRAVIA KD-98Z9G Reference Manual page 3

• Be sure to use the screws supplied with the Wall-Mount Bracket
when attaching the Wall-Mount Bracket to the TV set. The
supplied screws are designed as indicated by illustration when
measured from the attaching surface of the Wall-Mount Bracket.
The diameter and length of the screws differ depending on the
Wall-Mount Bracket model.
Use of screws other than those supplied may result in internal
damage to the TV set or cause it to fall, etc.
KD-98Z9G
12 mm - 16 mm
Screw (M8)
Wall-Mount Bracket
TV set
KD-85Z9G
10 mm - 12 mm
Screw (M6)
Wall-Mount Bracket
TV set
Transporting
• Before transporting the TV set, disconnect all cables.
• Three or more people (five or more people for KD-98Z9G) are
needed to transport a large TV set.
• When transporting the TV set by hand, hold it as shown below.
Do not put stress on the LCD panel and the frame around the
screen.
KD-98Z9G
KD-85Z9G
• When transporting the TV set, do not subject it to jolts or
excessive vibration.
• When transporting the TV set for repairs or when moving, pack
it using the original carton and packing material.
Topple prevention
Table-Top Stand
(Models with supplied support belt kit)
Refer to the Setup Guide on top of the cushion.
The supplied wood screw is only for affixing to a solid object
made of wood.
(Except models with supplied support belt kit)
KD-98Z9G
8 mm - 12 mm
M6 screw (not
supplied)
Screw (not
supplied)
1.5 N·m
{15 kgf·cm}
Cord (not
supplied)
3
GB