Samsung RB36J8 Series User Manual page 91

Now that you have your new refrigerator
installed and in place, you are ready to
set up and enjoy the full features and
functions of the appliance.
By completing the following steps, your
refrigerator should be fully operational.
DA68-03174M-11.indb 21
If not, first check the power supply
and electricity source or try the
troubleshooting section at the back of this
user guide.
If you have any further questions, contact
your Samsung Electronics service center.
1. Place the refrigerator in an appropriate
location with reasonable clearance
between the wall and the refrigerator.
Refer to installation instructions in this
manual.
2. Before using the refrigerator please
remove the shelf corner covers shown
on below figure.
(The Foam-PE are used to secure your
refrigerator during transportation).
3. Once the refrigerator is plugged in,
make sure the interior light comes on
when you open the doors.
4. Set the temperature control to the coldest
temperature and wait for an hour.
The freezer should get slightly chilled and
the motor should run smoothly.
5. After powering the refrigerator, it
will take a few hours to reach the
appropriate temperature.
Once the refrigerator temperature is
sufficiently cool, you can store food
and drink in the refrigerator.
After powering the refrigerator, the
alarm will sound. Press Freezer or
Fridge button.
English 21
2017. 9. 12. 10:08