Table of Contents
Advertisement
TQ
ADVANCED TUNING GUIDE
i
MENU TREE
The menu tree below shows how to navigate through
the TQi transmitter's various settings and functions.
Press and hold MENU to enter the menu tree, and use
the following commands to navigate through the
menu and select options.
MENU: When you enter a menu, you always start at
the top. Press MENU to move down the menu
tree. When you reach the bottom of the tree,
pressing MENU again will return you to the top.
SET:
Press SET to move across the menu tree and
select options. When an option is committed
to the transmitter's memory, the status LED will
rapidly blink green.
BACK: Press both MENU and SET to go back one level
in the menu tree.
EXIT:
Press and hold MENU to exit programming.
Your selected options will be saved.
ECHO: Press and hold SET to activate the "echo"
function. Echo will "play back" your current
position on the Menu Tree, should you lose
your place. For example: If your current position
is Steering Channel End Points, holding SET will
cause the LED to blink green twice, green once,
and then red three times. Echo will not alter
your adjustments or change your position in
the programming sequence.
Below is an example of how to access a function in the menu
tree. In the example, the user is setting the Multi-Function knob
to be a Steering % (Dual Rate) control.
To set the Multi-Function knob to control STEERING % (DUAL RATE):
1. Switch the transmitter on
2. Press and hold MENU until the green LED lights. It will blink in single
intervals.
3. Press SET. The red LED will blink in single intervals to indicate Steering
Sensitivity (Expo) has been selected.
4. Press MENU twice. The red LED will blink three times repeatedly to
indicate Steering % (Dual Rate) has been selected.
5. Press SET to select. The green LED will blink 8 times fast to indicate
successful selection.
6. Press and hold MENU to return to driving mode.
*Torque Control is a feature designed only for use with the power system in the Traxxas Funny Car Race Replica (Model #6907).
Enter Programming
Press and hold
MENU for 3 seconds
1
Multi-Function Knob
Press
SET
One Blink Green
Press
MENU
2
Channel Setup
Press
SET
Two Blinks Green
Press
MENU
Press
MENU
3
Mode Selection
Press
SET
Three Blinks Green
Press
MENU
4
Traxxas Link
Press
SET
Four Blinks Green
Press MENU to move through options.
Press SET to select an option.
1
Steering Sensitivity (Expo)
One Blink Red
2
Throttle Sensitivity (Expo)
Two Blinks Red
3
Steering % (Dual Rate)
Three Blinks Red
4
Braking %
Four Blinks Red
5
Throttle Trim
Five Blinks Red
6
Knob Disabled
Six Blinks Red
7
Torque Control*
Seven Blinks Red
8
TSM
Eight Blinks Red
1
Press
Steering (Channel 1)
SET
One Blink Green
2
Throttle (Channel 2)
Press
SET
Two Blinks Green
3
Shift (Channel 3)
Press
SET
Three Blinks Green
Press SET to select an option.
1
Electric
One Blink Red
Press
MENU
2
Nitro
Two Blinks Red
1
Model Locking
Press
SET
One Blink Green
Press
MENU
2
Press
Delete Model
SET
Two Blinks Green
Note: The transmitter is "live" during programming
so you can test the settings real time without having
to exit the menu tree.
Press MENU to move through options.
Press SET to select an option.
1
Servo Reversing
Press SET to reverse
servo direction.
One Blink Red
2
Sub-Trim
Use knob to adjust
sub-trim. Press SET to save.
Two Blinks Red
3
End Points
Use steering wheel to
adjust. Turn right to desired
Three Blinks Red
end point, press set to save.
Turn left to desired endpoint and press set to save.
To reset max throw: Let go of controls and press SET.
4
Reset End Points
Press SET to restore
factory default endpoints.
Four Blinks Red
1
Servo Reversing
Press SET to reverse
servo direction.
One Blink Red
2
Sub-Trim
Use knob to adjust sub-
trim. Press SET to save.
Two Blinks Red
3
End Points
Use trigger to adjust. Pull
back to desired end point,
Three Blinks Red
press set to save. Push
forward to desired endpoint and press set to save.
To reset max throw: Let go of controls and press SET.
4
Reset End Points
Press SET to restore
Four Blinks Red
factory default endpoints.
1
Servo Reversing
One Blink Red
1
Unlock
One Blink Red
2
Lock
Two Blinks Red
3
Unlock All
Three Blinks Red
1
C onfirm Deletion
One Blink Red
Advertisement
Table of Contents
