Chevrolet Corvette 2023 Owner's Manual page 275

Chevrolet Corvette Owner Manual (GMNA-Localizing-MidEast-16287460) -
2023 - CRC - 4/26/22
Caution (Continued)
would not be covered by the vehicle
warranty. Whenever possible, turn off or
unplug all accessories on either vehicle
when jump starting.
3. Turn off the ignition on both vehicles.
Unplug unnecessary accessories plugged
into the accessory power outlet. Turn off
the radio and all lamps that are not
needed. This will avoid sparks and help
save both batteries. And it could save
the radio!
4. Open the hood. See Hood 0 17.
5. Release the four clips for the left and
right outer covers.
6. Release the five clips and remove the
outer cover to access the battery.
7. Locate the battery positive (+) terminal
and remote jump starting negative
( ) post.
8. Check that the jumper cables do not
have loose or missing insulation. If they
do, you could get a shock. The vehicles
could be damaged too.
9. Open the discharged battery positive (+)
terminal trim cover and connect one end
of the positive (+) cable.
10. Do not let the other end of the
positive (+) cable to touch metal.
Connect it to the good battery
positive (+) terminal.
Vehicle Care
11. Connect one end of the negative ( )
cable to the good battery negative ( )
terminal.
Do not let the other end touch anything
until the next step.
12. Connect the other end of the negative
( ) cable to the remote jump starting
negative ( ) post.
13. Start the vehicle with the good battery
and run the engine for at least
four minutes.
14. Try to start the vehicle that had the
discharged battery. If it will not start
after a few tries, it probably needs
service.
Caution
If the jumper cables are connected or
removed in the wrong order, electrical
shorting may occur and damage the
vehicle. The repairs would not be covered
by the vehicle warranty. Always connect
and remove the jumper cables in the
correct order, making sure that the cables
do not touch each other or other metal.
275