Asus PRIME B760M-A AX Manual page 13

4. Fan headers
The Fan headers allow you to connect fans to cool the system.
5. Power connectors
These Power connectors allow you to connect your motherboard to a power supply. The
power supply plugs are designed to fit in only one orientation. Find the proper orientation and
push down firmly until the power supply plugs are fully inserted.
Ensure to connect the 8-pin power plug.
• We recommend that you use a PSU with a higher power output when configuring a
system with more power-consuming devices. The system may become unstable or
may not boot up if the power is inadequate.
• If you want to use two or more high-end PCI Express x16 cards, use a PSU with
1000W power or above to ensure the system stability.
6. M.2 slots (Key M)
The M.2 slots allow you to install M.2 devices such as M.2 SSD modules.
• Intel
M.2_1 slot (Key M), type 2242/2260/2280 (supports PCIe 4.0 x4 mode)
Intel
•
M.2_2 slot (Key M), type 2242/2260/2280 (supports PCIe 4.0 x4 mode)
The M.2 SSD module is purchased separately.
7. SATA 6Gb/s ports
The SATA 6Gb/s ports allow you to connect SATA devices such as optical disc drives and
hard disk drives via a SATA cable.
8. USB 3.2 Gen 1 Type-C
The USB 3.2 Gen 1 Type-C
Gen 1 Type-C modules for additional USB 3.2 Gen 1 Type-C
®
the front panel. The USB 3.2 Gen 1 Type-C
transfer speeds of up to 5 Gb/s.
The USB 3.2 Gen 1 Type-C
9. USB 3.2 Gen 1 headers
The USB 3.2 Gen 1 headers allow you to connect USB 3.2 Gen 1
modules for additional USB 3.2 Gen 1 ports. The USB 3.2 Gen 1
headers provide data transfer speeds of up to 5 Gb/s.
The USB 3.2 Gen 1 module is purchased separately.
PRIME B760M-A AX
13 & 12 Gen Processors
® th th
B760 Chipset
®
Front Panel connectors
®
connectors allow you to connect USB 3.2
®
module is purchased separately.
®
ports on
®
connectors provide data
®
FAN PWM
FAN IN
FAN PWR
GND
NC VBUS
NC
TX2+
CC1
TX2-
VBUS GND
RX1-
RX2+
RX1+
RX2-
GND GND
TX1- D-
TX1+
D+
VBUS
CC2
PIN 1
USB3+5V
USB3+5V IntA_P1_SSRX-
IntA_P2_SSRX- IntA_P1_SSRX+
IntA_P2_SSRX+ GND
GND IntA_P1_SSTX-
IntA_P2_SSTX- IntA_P1_SSTX+
IntA_P2_SSTX+ GND
GND IntA_P1_D-
IntA_P2_D- IntA_P1_D+
IntA_P2_D+ GND
1-3