Memory Card Formatting; Turning The Handset; Access Codes; Pin Code (4 To 8 Digits) - LG KU380 User Manual

Getting Started

Memory card formatting

Before you start to use the memory card you
have to format it. After you insert the
memory card, select Menu > Settings >
Phone settings > Memory manager >
External memory, then press
soft key.
This operation should only be done when
you insert the memory card for the first time.
During formatting various folders will be
created for different data types.

Turning the handset

on/off
Turning your handset on
Ensure that your USIM card is in your
handset and the battery is charged. Press and
hold until the power comes on. Enter the
USIM PIN code that was supplied with your
USIM card if the PIN code request is set to
On. (Note: Please refer to page 79)
After a few seconds you will be registered on
the network.
22
Turning your handset off
Press and hold
There may be a few seconds delay while the
handset powers down.
Do not turn the handset on again during this
the left time.

Access codes

You can use the access codes described in
this section to avoid unauthorised use of your
phone. The access codes (except the PUK
and PUK2 codes) can be changed by using
the Change codes feature [Menu #.2.6.3].

PIN code (4 to 8 digits)

The PIN (Personal Identification Number)
code protects your USIM card against
unauthorised use. The PIN code is usually
supplied with the USIM card. When the PIN
code request is set to On, your phone will
request the PIN code every time it is
switched on. When the PIN code request is
set to Off, your phone connects to the
network directly without the PIN code.
until the power goes off.