Samsung NK30CB600W Series Installation & User Manual page 15

Terminal
box cover
Terminal
box
DG68-01416C-02_IB(FULL)_NK30CB600W12AA.indb 15 DG68-01416C-02_IB(FULL)_NK30CB600W12AA.indb 15
14-1. Disconnect power circuit
breaker.
14-2. Remove terminal box cover.
14-3. Remove the strain relief hole
cover in the terminal box and
install a UL/CSA approved strain
relief.
E F
A
B
C
D
A. UL listed wire nuts
B. Green (or bare) wire connected to
green/yellow wires
C. White wires
D. Black wires
E. Home power supply cable
F. UL/CSA approved strain relief
14-4. Run home power supply wiring
through strain relief into
terminal box.
14-5. Use UL listed wire nuts and
connect white wires (C) together.
14-6. Use UL listed wire nuts and
connect black wires (D) together.
Connect green (or bare) ground
14-7.
wire from home power supply
to the green/yellow ground wire
(B) in terminal box using UL
listed wire nuts.
14-8. Tighten strain relief screw.
14-9. Put the wires into the terminal
box and install terminal box
cover.
14-10. Reconnect power circuit breaker.
English 15 English 15
2023-05-30 오전 10:54:25 2023-05-30 오전 10:54:25