LG Stylo 2 PLUS Quick Start Manual page 25

consultation with the FDA and the other federal health
and safety agencies. The FCC/ISEDC limit for RF
exposure from wireless telephones is set at a Specific
Absorption Rate (SAR) of 1.6 watts per kilogram (1.6
W/kg). The FCC/ISEDC limit is consistent with the
safety standards developed by the Institute of Electrical
and Electronic Engineering (IEEE) and the National
Council on Radiation Protection and Measurement.
The exposure limit takes into consideration the body's
ability to remove heat from the tissues that absorb
energy from the wireless phone and is set well below
levels known to have effects. Manufacturers of wireless
phones must report the RF exposure level for each
model of phone to the FCC/ISEDC. The FCC website
(http://www.fcc.gov/oet/rfsafety) gives directions for
locating the FCC identification number on your phone
so you can find your phone's RF exposure level in the
online listing.
8. What has the FDA done to measure the
radiofrequency energy coming from wireless
phones?
The Institute of Electrical and Electronic Engineers
(IEEE) is developing a technical standard for
measuring the radiofrequency energy (RF) exposure
from wireless phones and other wireless handsets
with the participation and leadership of FDA scientists
and engineers. The standard, 'Recommended
Practice for Determining the Spatial- Peak Specific
Absorption Rate (SAR) in the Human Body Due to
Wireless Communications Devices: Experimental
Techniques, ' sets forth the first consistent test
methodology for measuring the rate at which RF is
deposited in the heads of wireless phone users. The
test method uses a tissue simulating model of the
human head. Standardized SAR test methodology
is expected to greatly improve the consistency of
23