Nokia 3200 Service Manual page 13

nokia
C P
ONNECTING EOPLE
Nokia Mobile Phones Customer Care EMEA
Technical Services, Repair Concepts
Open the snaps with SRT-6 on both sides of the Display
Shield.
Take a clean cloth and press the LCD from the LCD Frame.
Bend the frame a bit, shift the UI Module to the right and
then pull it up.
Remove the Vibra Motor with the rubber.
Service Manual 3200 Level 1&2
PAGE 13 (25)
Confidential
Remove Display Shield.
Protect LCD with a film.
To remove the DC Jack, place tweezers between the
spring contacts and under the Jack. You'll need to use
additional force to pull the Jack upwards.
Remove the Release Spring before detaching Release
Button.
Copyright 2003 © Nokia Corporation
Approved 1.0
DJk
28.10.2003