Table of Contents
Advertisement
Provide electricity
Plug cord into a properly grounded
socket.
At this time the pump will begin to
move water from the bottle to the hot
and cold tanks. It will take up to
approximate 5 minutes to fill the tanks
for the first time. During this period the
pump will run continuously. This is normal.
Operation Instructions
Light indicators
The indicator lights show that the device is
working correctly. After connecting the
device, check if the indicators are on.
Lights up when water shortage.
Indicates that the water is being heated.
Indicates that the water is being chilled.
Activate heating and cooling
This unit will not dispense hot or cold
water until the switches are activated.
To activate, push top side of power
switches in to start heating and cooling
water.
- If you do not want to heat water, push
bottom side of red switch in.
- If you do not want to cool water, push
bottom side of green switch in;
Dispensing water
This unit has been tested and sanitized
prior to packing and shipping. During
transit dust and odors can accumulate in
the tank and lines. Dispense and dispose
at least one liter of water to prior to
drinking any water.
8
Fig.
8
Fig.
9
Advertisement
Table of Contents
