North Star M99905C Owner's Manual page 29

Operation – Using the Sprayer (continued)
6. Ensure tank
flushed
7. Check drain
cap
8. Fill tank
9. Ensure
chemical
mixed
10. Replace fill
cap
Ensure tank is flushed of all chemicals from prior uses.
- Chemicals can interact dangerously when mixed, and residue chemicals are
also a health hazard.
Before filling tank, ensure drain cap is securely tightened.
Add pesticide to tank through fill cap:
1. Confirm the chemical/water dilution ratios specified on the chemical
label.
2. Determine chemical and water volumes needed for the planned
application, taking into consideration that maximum tank capacity is 16
gallons for Item# 99905. 26 gallon tank capacity for Item# 99906.
Note: Only purchase and mix as much chemical as you need for the
planned application in order to minimize chemical over-application
and the need for storing unused chemicals.
3. Add chemical to the tank through the fill cap.
If the chemical is not pre-mixed, add water and pesticide concentrate in
the order prescribed on the label.
Fig06459
Ensure chemical is thoroughly mixed in tank.
- Stirring device should be made of metal or plastic, non-chemical absorbing
material, and then properly cleaned and stored after use.
Replace fill cap and tighten securely.
Fig06405
29
Drain cap