Graco SWEET2SLEEP Instructions Manual page 6

• Please make sure that the adjustable
side rail faces in the same direction
with adjustable feet.
Height Adjustment
See images -
21 24
• The crib can be adjusted to different
height positions.
• The crib can be inclined with a
maximum variance of 4 positions
between one leg and the other (for
example: the right leg in position 5 and
the left leg in position 1, see fig. 23
24
• It only be applicable to cradle state, but
not to bedside sleeper state.
• The head of the child should always be
positioned on the highest side.
Use Wheels
See images -
25 26
1. At this point the crib is ready to be
used.
• Do not use the crib with adjustable
feet partially or totally rotated and
unlocked. The correct position for use
is illustrated in figure . In the case of
20
accidental knocks against adjustable
feet, return them to the correct
position by lifting the crib slightly.
Use Bedside Sleeper
See images -
27 36
1. Press the button to drop the side
down.
2. Position next to bed, Connect Buckle
to the crib then loop strap around bed
frame and connect to adjuster buckle,
then pull straps tight.
• During fixing the crib to the parent's
bed, If it is not possible to slide the feet
of the crib under the parent's bed, you
can rotate the adjustable feet.
3. Ensure no gap between parent's
mattress and the crib. The maximum
height difference between the parents'
mattress and the drop side at the
lowest position is 2cm.
4. The type of adult bed which can be
used with bedside sleeper is slatted
bed frame and box / divan bed frame,
the dimensions of adult bed shown on
&
fig. & .
35 36
• Check to make sure that the crib in
the bedside sleeper mode does not
interfere with the parent's bed.
• During use, make sure that the parents
bed sheets, blankets etc. Do not enter
and cover the interior of the crib.
• In the bedside sleeper mode the 2 legs
of the crib should always be adjusted
to the same height.
• Before every use always check to make
sure that there is no space between
the parent's mattress and the side of
the crib. If there is, pull the belts firmly
to tighten until there's no space and
the permitted condition of use has
been restored.
• Use of the product is only permitted
with beds and/or mattresses with
straight sides. Use of the product with
round beds and/or mattresses or water
beds is not permitted.
• When the product is used in the
"bedside sleeper mode" (fixing to the
bed, it should always be fitted to the
long side of access to the bed. Do not
fix the product to the head or bottom
of the bed.
9
Use Storage Bag
See images -
37 38
• Refer to Bedside Sleeper Assembly and
perform reverse operation to fold the
unit, and use the bag for convenient
transportation.
10