Reading, Writing And Deleting Messages; Reading Text Messages - Multitech MultiConnect MTC-LNA4 User Manual

CONFIGURING AND COMMUNICATING WITH YOUR DEVICE
7. If required, change the working directory to "folder1".
Enter:
AT#FTPCWD="folder1"
8. Enter the file name.
Enter:
AT#FTPGET="filename.txt"
where filename.txt is the file to download.
The device responds with:
CONNECT
The file is received through the device. The device responds with:
NO CARRIER
The data connection closes automatically when the file sending ends.
Closing the FTP Data Connection
After the file is sent:
1. Close the FTP connection.
Enter:
AT#FTPCLOSE
2. Close the PPP data connection.
Enter:
Verizon:
AT#SGACT=3,0
Other Networks:
AT#SGACT=1,0
The device responds with OK.

Reading, Writing and Deleting Messages

Reading Text Messages

NOTE: For CAT M1 devices, you can only send/receive SMS messages from other CAT M1 devices on the same
network.
To read a text message in text mode:
1. Send a message to the phone number of the currently installed SIM.
2. Put the device in text mode.
Enter:
AT+CMGF=1
3. Read message.
Enter:
AT+CMGR=1
Example response:
+CMGR: "REC UNREAD","0001112222","","20161006135126"
30
®
MultiConnect Cell MTC-LNA4 User Guide