Answer Or Reject A Call - Nokia RM-387 User Manual

RM387_0.3_080403_clean_fcc.fm Page 20 Wednesday, April 30, 2008 12:38 PM
Note: Using voice tags may be difficult in a noisy environment or during an
emergency, so you should not rely solely upon voice dialling in all circumstances.
1. In the standby mode, press and hold the right selection key.
If you are using a compatible headset with the headset key, press and hold the
headset key.
2. When Speak now is displayed, speak the voice command clearly. The device
plays the voice command of the best match. After 1.5 seconds, the device dials
the number; if the result is not the correct one, before dialling select another
entry.
Make a conference call
Your device supports conference calls (network service) between a maximum of
six participants, including yourself.
1. Make a call to the first participant.
2. To make a call to another participant, select
3. To create the conference call when the new call is answered, select
Conference.
To add another person to the conference call, repeat step 2, and select
Options > Conference >
4. To end the conference call, press the end key.

■ Answer or reject a call

To answer a call, press the call key.
To mute the ringing tone, select Silence.
To reject the call, press the end key, or select
activated Call divert > If busy, rejecting the call diverts the call.
To send a text message as a reply to the caller instead of answering the call, select
Options > Send message. To activate the text message reply and edit the message,
select > Settings > Phone sett.
Message text.
Call waiting
During a call, to answer the waiting call, press the call key. The first call is put on
hold. To switch between the two calls, select Swap. To end the active call, press
the end key.
Options >
Add to conference.
Options > Reject. If you have
> Phone > Call > Reject call with message
New call.
Options >
and
20