Table of Contents
Advertisement
To share your mobile data connection with another Bluetooth® device
1
Make sure that your device and the Bluetooth® device are paired with each
other and that mobile data traffic is activated on your device.
2
Your device: From your Home screen, tap
3
Find and tap Settings > More > Tethering & portable hotspot and then drag the
slider beside Bluetooth tethering to the right.
4
Bluetooth® device: Set up the device so that it obtains its network connection
using Bluetooth®. If the device is a computer, refer to the relevant instructions
to complete the setup. If the device runs on the Android™ operating system,
tap the settings icon beside the name of the device that it is paired with under
Settings > Bluetooth > Paired devices, then mark the Internet access checkbox.
5
Your device: Wait for
is complete.
6
To stop sharing your mobile data connection, drag the slider beside Bluetooth
tethering to the left.
The Bluetooth tethering function is turned off every time you turn off your device or turn off the
Bluetooth® function.
For more information about pairing and turning on mobile data traffic, see
with another Bluetooth® device on page 126 and To add a virtual private network on
page 51.
To use your device as a portable Wi-Fi hotspot
1
From your Home screen, tap
2
Find and tap Settings > More > Tethering & portable hotspot.
3
Tap Portable Wi-Fi hotspot settings > Configure Wi-Fi hotspot.
4
Enter the Network name (SSID) information.
5
To select a security type, tap the Security field. If required, enter a password.
6
Tap Save.
7
and drag the slider beside Portable Wi-Fi hotspot to the right.
Tap
8
If prompted, tap OK to confirm.
Wi-Fi hotspot is active.
9
To stop sharing your data connection via Wi-Fi, drag the slider beside Portable
Wi-Fi hotspot to the left.
To allow a WPS-supported device to use your mobile data connection
1
Make sure that your device is functioning as a portable Wi-Fi hotspot.
2
From your Home screen, tap
3
Find and tap Settings > More > Tethering & portable hotspot > Portable Wi-Fi
hotspot settings.
4
Make sure that the Discoverable checkbox is marked.
5
Under Configure Wi-Fi hotspot, make sure that your portable hotspot is
secured by a password.
6
Tap WPS Push Button, then follow the relevant instructions. Alternatively, tap
> WPS PIN Entry, then enter the PIN that appears on the WPS-supported
device.
To rename or secure your portable hotspot
1
From the Home screen, tap
2
Find and tap Settings > More > Tethering & portable hotspot.
3
Tap Portable Wi-Fi hotspot settings > Configure Wi-Fi hotspot.
4
Enter the Network name (SSID) for the network.
5
To select a security type, tap the Security field.
6
If required, enter a password.
7
Tap Save.
This is an internet version of this publication. © Print only for private use.
.
to appear in the status bar. Once it appears, the setup
.
appears in the status bar once the portable
.
.
48
To pair your device
Advertisement
Table of Contents
