Bosch VJD-8000 Operation Manual page 9

IP Matrix operation with KBD-UXF
Blinking indicates that the function is enabled.
4
Note: Only supported by firmware 9.60 and later. Playback permission must be available.
4
Note: Blinking indicates that the input of a number is required.
4
Note: This key provides a round-trip function. The last layout starts again, if the first layout is
reached.
4
Note: This key provides a round-trip function. The first layout starts again, if the last layout is
reached.
4
4
1 .... 0 Number keys
4
ESC Cancels a number entry.
4
OK Confirms a number entry.
4
To select a preposition:
4
Bosch Security Systems B.V.
Switches between live mode and playback mode.
Press the key to switch.
Loads a camera sequence
Press the key, enter a valid sequence number (1 to 32), then click OK.
Switches to previous layout with less monitors
Press the key to decrease the number of monitors on the current display.
Switches to next layout with more monitors
Press the key to increase the number of monitors on the current display.
Turns full-screen of currently selected monitor on/off
Press the key to turn full-screen on or off.
Turns full-screen with picture-in-picture on/off
Press the key to turn full-screen with picture-in-picture on or off.
Use to select favorite views, sequences, prepositions, or single devices.
Press the key to cancel the entering of a number.
Press the key to confirm.
Selects or saves a preposition
Press the key, enter the preposition number using the number keys, then click OK.
Operation manual
Operation | en 9
2023-03 | V02 | DOC