Related Manuals for Sharper Image 208561
Summary of Contents for Sharper Image 208561
- Page 1 WIRELESS TIRE PRESSURE MONITORING SYSTEM Item No. 208561 User Guide Thank you for purchasing the Wireless Tire Pressure Monitoring System. Please take a moment to read this guide and store it for future reference. - 1 -...
-
Page 2: Button Descriptions
INTRODUCTION The Tire Pressure Monitoring System (TPMS) monitors your tire pressure and temperature in real time. It includes 4 wireless sensors for your tires and a solar-powered display for your dashboard. If abnormal tire pressure and/or temperature is detected, the system will send a warning sound and a bright flashing icon to inform the driver in real time. -
Page 3: Setup And Pairing
INSTALLING THE WIRELESS SENSORS 1. Screw in the anti-theft nut. 2. Tighten the sensor. 3. Tighten the anti-theft nut counterclockwise to hold the sensor. 4. After tightening the sensor, use a wrench to tighten the anti-theft nut counterclockwise. SETUP AND PAIRING In the Standby state, press and hold the RIGHT button for 3 seconds to enter the configuration pairing mode. - Page 4 REAR FRONT WHEEL LEFT FRONT WHEEL LEFT REAR WHEEL REAR RIGHT WHEEL At this time, the “0” on the interface is flashing. Press the RIGHT button to enter the pairing mode. The left front tire displays “00” and small tire flashing, indicating a successful pairing. Next, the right front tire will pair automatically.
- Page 5 CHANGING THE TIRE PRESSURE VALUES NOTE: The default pressure unit is BAR. The default low pressure is 26 PSI (1.8 BAR). The default high pressure is 46 PSI (3.2 BAR). ABOVE: Examples of low and high pressure limits. Front Tires – Low Pressure Limit In standby mode, long press the MENU button for 3 seconds to enter the system setting state.
-
Page 6: Warnings And Alarms
TIRE EXCHANGE ( TIRE ROTATION ) When you rotate your tires, there is no need to switch the sensors. Simply tell the device which tires have been swapped. In standby mode, long press MENU for 3 seconds to enter the system setting state. Press MENU SEVEN TIMES to enter the tire exchange mode. -
Page 7: Changing Sensor Batteries
3. High Pressure Warning — When it is detected that any tire pressure is higher than 125% of the cold tire standard tire pressure value, the buzzer will sound, and the corresponding tire icon and pressure data and the TPMS icon and high pressure icon will flash continuously. When the tire pressure is lowered, the alarm is cleared.