Roland VC-2 Owner's Manual page 82

Effects List
29: OD/DS→Delay
(Overdrive/Distortion→Delay)
This effect connects either Overdrive or Distortion and Delay
in series.
Parameter Value
Drive Mode OD, DS
Drive 0–127
Amp Sim Sw OFF, ON
Amp Type SMALL,
BUILT-IN,
2-STACK,
3-STACK
Distortion 0–127
(DS) Level
Delay Time 0–1300 ms,
note
Delay Feed- -98– +98 %
back
Low Damp 50–4000 Hz
Freq
Low Damp -36–0 dB
Gain
Hi Damp 2000–20000 Hz
Freq
Hi Damp -36–0 dB
Gain
Delay Level 0–127
Ps Low Freq 50–4000 Hz
Ps Low Gain -15– +15 dB
Ps Hi Freq 2000–20000 Hz
Ps Hi Gain -15– +15 dB
30: Cho/Flg→Delay
(Chorus/Flanger→Delay)
This effect connects either Chorus or Flanger and Delay in
series.
Parameter Value
Mod Mode CHORUS,
FLANGER
Mod Rate 0.05–10.0 Hz,
note
82
Description
Selects whether to use overdrive
(OD) or distortion (DS).
Degree of distortion
Turns the amp simulator on/off.
Type of guitar amp
SMALL: small amp
BUILT-IN: single-unit type amp
2-STACK: large double stack amp
3-STACK: large triple stack amp
Volume of the overdrive or distor-
tion sound.
Adjusts the delay time from the di-
rect sound until the delay sound is
heard.
Adjusts the proportion of the delay
sound that is fed back into the ef-
fect. Negative (-) settings will in-
vert the phase.
Adjusts the frequency below
which sound fed back to the effect
will be cut.
The Low Damp function damps
the low frequency band of the de-
lay sound quicker than other
bands, which makes for a clearer
delay effect.
Degree of Low Damp
Adjusts the frequency above
which sound fed back to the effect
will be cut.
High Damp, by attenuating the
higher frequencies first, makes the
delay sound more natural.
Degree of High Damp
Volume of the delay sound.
Frequency of the low range
Gain of the low range
Frequency of the high range
Gain of the high range
Description
Selects whether to use chorus or
flanger.
Adjusts the speed of modulation
for the chorus or flanger.
Parameter Value
Mod Depth 0–127
Mod Phase 0–180 deg
Mod Pre De- 0–50.0 ms
lay
Mod Feed- -98– +98 %
back
Xover Low- 50–4000 Hz
Freq
Xover Low -36–0 dB
Gain
Xover Hi- 2000–20000 Hz
Freq
Xover Hi -36–0 dB
Gain
Mod Level 0–127
Delay Time 0–1300 ms,
note
Delay Feed- -98– +98 %
back
Low Damp 50–4000 Hz
Freq
Low Damp -36–0 dB
Gain
Hi Damp 2000–20000 Hz
Freq
Hi Damp -36–0 dB
Gain
Delay Level 0–127
Ps Low Freq 50–4000 Hz
Ps Low Gain -15– +15 dB
Ps Hi Freq 2000–20000 Hz
Ps Hi Gain -15– +15 dB
Description
Adjusts the depth of modulation
for the chorus or flanger.
Sets how the chorus or flanger
sound is spread.
Adjusts the delay time from the di-
rect sound until the chorus or
flanger sound is heard.
Adjusts the proportion of the effect
sound that is fed back into the ef-
fect. Negative (-) settings will in-
vert the phase.
Attenuates the effect in the range
below the specified frequency.
Specifies how greatly the low range
will be attenuated.
Attenuates the effect in the range
above the specified frequency.
Specifies how greatly the high
range will be attenuated.
Volume of the chorus or flanger
sound.
Adjusts the delay time from the di-
rect sound until the delay sound is
heard.
Adjusts the proportion of the delay
sound that is fed back into the ef-
fect. Negative (-) settings will in-
vert the phase.
Adjusts the frequency below which
sound fed back to the effect will be
cut.
The Low Damp function damps the
low frequency band of the delay
sound quicker than other bands,
which makes for a clearer delay ef-
fect.
Degree of Low Damp
Adjusts the frequency above which
sound fed back to the effect will be
cut.
High Damp, by attenuating the
higher frequencies first, makes the
delay sound more natural.
Degree of High Damp
Volume of the delay sound.
Frequency of the low range
Gain of the low range
Frequency of the high range
Gain of the high range