Table of Contents
Advertisement
1
Turn off the projector and unplug the power cord.
2
Wait 60 minutes to allow the projector to cool thoroughly.
3
Remove the lamp door by (a) removing the screw on the side of the lamp door,
(b) lifting the door off.
4
Loosen the captive screw that attaches the lamp housing to the projector.
Carefully remove the lamp housing. Dispose of the lamp in an environmentally
proper manner.
5
Install the new lamp housing and tighten the screw.
6
Re-attach the lamp connector to the projector.
7
Replace the lamp door by sliding it into place.
8
Plug in the power cord and press the Power button to turn the projector back on.
9
To reset the lamp hour timer, navigate to the Status and Service menu and
select Reset Lamp Hours. See page 31 for details.
All manuals and user guides at all-guides.com
37
turn off and unplug
projector
(a)
(b)
loosen screw
wait 60 minutes
Advertisement
Table of Contents
