Removing The Front Bezel - Lenovo Y520T-25IKL Hardware Maintenance Manual

Step 5. Press and push the four plastic tabs on the top of the chassis outward
2
bezel .
2
1
Step 6. To reattach the top bezel:
a. Insert the four plastic tabs into the corresponding holes on the top of the chassis until they
snap into position.
Step 7. Reinstall all the removed parts, and then reconnect the cables.

Removing the front bezel

Attention: Turn off the computer and wait 3 to 5 minutes to let it cool down before removing the cover.
Note: It may be helpful to place the computer face-down on a soft flat surface for this procedure. Lenovo
recommends that you use a blanket, towel, or other soft cloth to protect the computer screen from scratches
or other damage.
To remove the front bezel:
Step 1. Remove any media from the drives, shut down the operating system, and turn off the computer and
all attached devices.
Step 2. Unplug all power cords from electrical outlets.
Step 3. Disconnect all cables attached to the computer. This includes power cords, input/output (I/O)
cables, and any other cables that are connected to the computer. Refer to Locating connectors,
controls and components to locate the various connectors.
Step 4. Remove the computer cover. Refer to Removing the computer cover.
Step 5. Release the three plastic tabs on the left and right sides of the front bezel
front bezel outward
28
Lenovo Legion Y520 Tower Hardware Maintenance Manual
1
2 .
1 , and then remove the top
1 , and then pivot the