Table of Contents
Advertisement
Maintenance
3.
Check the battery connections. They
should be clean, secure, and covered by
an insulating cover. WARNING! Bad
connections can produce shorting or
arcing and cause an explosion.
EMU35496
Connecting the battery
EWM00573
WARNING
Mount the battery holder securely in a dry,
well-ventilated, vibration-free location in
the boat. Install a fully charged battery in
the holder.
ECM01125
NOTICE
Do not reverse the battery cables. Other-
wise, the electrical parts could be dam-
aged.
1.
Make sure the main switch (on applica-
ble models) is "
on the battery.
2.
Connect the red battery cable to the
POSITIVE (+) terminal first. Then connect
the black battery cable to the NEGATIVE
(-) terminal.
3
1. Red cable
2. Black cable
3. Battery
90
[EWM01913]
" (off) before working
1
2
ZMU01811
3.
The electrical contacts of the battery and
cables must be clean and properly con-
nected, or the battery will not start the
engine.
Connecting an accessory battery (optional)
If connecting an accessory battery, consult
your Yamaha dealer about correct wiring. For
the fuse size, see ABYC (E-11).
Single engine
3
1. Isolator leads with circuit protection
2. Red cable
3. Black cable
4. Fuse
5. Battery for accessories
6. Battery for starting
7. Negative connecting cable
2
1
4
6
5
7
ZMU05939
Advertisement
Table of Contents
