Replacing Led Lamp; Removing Led Lamp - Bosch KGN27NWFAG Manual

Repair

4.7 Replacing LED lamp

Required tools:
Slotted screwdriver Blade 2.4 mm x 0.4 mm x 60 mm, in
the kit [00341820]
Your appliance features a maintenance-free LED light.
These lights may be repaired by customer service or authorised techni-
cians only!
Danger
Risk of electric shock due to live parts!
Danger to life through electric shock in case of improper repair
▶ Electric parts should be repaired by a qualified electricians.
▶ After the repair have a safety test according VDE 0701 or country-
specific regulations performed.
Danger
Risk of electric shock due to live parts!
Death by electrocution
▶ Disconnect appliances from electrical supply at least 60 seconds
before starting repairs.
Caution
Sharp edges!
Cut injuries
▶ Wear protective gloves.
Prerequisite:
Appliance is disconnected from power supply.
Door is open.
Interior fittings are removed.
2021-04-19_9001640338

4.7.1 Removing LED lamp

1. Using slotted screwdriver release LED lamp cover hooks.
LED lamp cover is removed.
Copyright by BSH Hausgeräte GmbH Page 102 of 409