Table of Contents
Advertisement
No.
Connector/feature
10
Memory module slots (internal)
11
Built-in battery connector
(internal)
12
Trackpad connector (internal)
13
Built-in Wireless-LAN device
(internal)
14
Camera board connector
(internal)
15
USB 3.2 connectors Gen 1
(external)
16
Power button with fingerprint
reader connector
17
Thunderbolt 4 connectors (USB-
C) (external)
18
SD card slot
20
Keyboard connector
21
TrackPoint pointing cap cable
connector (internal)
52
ThinkPad P1 Gen 6 Hardware Maintenance Manual
Internal cable required
No
No
Trackpad cable
Wireless-LAN antenna kit
Camera cable
No
Power button with fingerprint
reader cable
No
No
Keyboard assembly with cables
TrackPoint pointing cap cable
Cable connection
Insert the memory modules into
these slots.
Connect the built-in battery
directly to this connector.
Connect one end of the trackpad
cable to the trackpad and the
other end to this connector.
Connect the connectors of
Wireless-LAN antenna kit.
Connect one end to the camera
board, and the other end to this
connector.
Connect USB-compatible
devices to this connector.
The power button with fingerprint
reader module comes with the
cable. Connect the cable to this
connector.
Connect a USB-C compatible
device or a Thunderbolt-4
compatible device or a USB-C
power adapter to this connector.
Insert a supported SD card into
this slot.
The keyboard assembly comes
with cables. Connect the
keyboard cable to this connector.
Connect the TrackPoint pointing
cap cable to this connector.
Advertisement
Table of Contents
