Remote - Boss AD-5 Owner's Manual

REMOTE

With a footswitch (FS-5U; optional) connected to
the REMOTE jack, you can temporarily turn the
effect on or off.
* If the knobs are turned while either Chorus or Reverb is
temporarily turned on or off, or if the power is turned off and
then on again, original settings and status are recalled.
By connecting two footswitches to the REMOTE
jack by means of a connector cable (Roland PCS-31;
optional), you can use the two footswitches to turn
on and off Chorus and Reverb.
REMOTE
TIP : CHORUS RING : REVERB
(Red)
REVERB
ON / OFF
Cord
(Roland PCS-31: Optional)
(White)
CHORUS
ON / OFF
With a mono cable connected to the REMOTE jack,
and using only one footswitch, you can switch on/
off only the Chorus effect.
REMOTE
TIP : CHORUS RING : REVERB
CHORUS
ON / OFF
* When a footswitch (FS-5U; optional) is connected to the
REMOTE jack, set the polarity switch in the following
manner:
Polarity Switch
13