Table of Contents
Advertisement
P
lacing, Leveling and Installation
Improper installation of the washer may cause noise and malfunctioning.
Note :
1.
The ventilating openings in the base area must not be obstructed by carpeting when the washing machine is
installed on a carpeted floor.
2.
Install the washing machine on a level and firm
surface.
How to adjust leveling
Turn the adjustable legs to set the washer
horizontal (Both the front legs).
Don't add anything under back side legs.
H
Distance between drain hose and the wall
Distance between drain hose and the wall should be more
than 10cm, and the distance between the other part and
the wall should be more than 2 cm.
More than 2cm
Anti-rat cover installation
*
Insert the anti rat cover firmly from back side of washing machine.
Middle Base
*
Parts can be different according to the model.
Adjustable leg
More than 10cm
More than 2cm
1
Installation area
Install the washer on flat and firm surface.
2
Checking level
The Basement is not flat, fill the water just touching the
Pulsator and see uniform distribution. If not, adjust the
legs as shown in the figure.
3
Checking Proper placement
Press the corners of the machine diagonally
as shown in the figure, if any movement is observed,
adjust the legs for proper leveling.
Low Base
8
Top View
FIXING POSITION
Adjustable Leg
Installation
Screws
Anti Rat Cover
Advertisement
Table of Contents
