Samsung OH46B-S User Manual page 70

2nd 3rd
Eco Solution Brightness Limit
(Supported model: OH46B)
Power Saving Mode
Eco Sensor
Screen Lamp Schedule
No Signal Power Off
Auto Power Off
Description
Turn the Brightness Limit on or off. If you select On, the display won't have the maximum brightness, but you will save energy.
― This function may not be supported depending on the model or geographical area.
Reduce the power consumption by adjusting the screen brightness.
Automatically adjust the picture brightness based on the ambient light level.
― If the screen contrast is not sufficient, set the
― This function may not be supported depending on the model.
• Minimum Backlight
Set the minimum brightness for the signage screen. This function only works if its value is lower than the value set in the
menu's Backlight setting.
― If
Eco Sensor is On, the display brightness may change (become slightly darker or brighter) depending on the surrounding light intensity.
― Available only when
Eco Sensor is set to On.
― This function may not be supported depending on the model.
• Screen Lamp Schedule
Enable or disable the lamp schedule.
• Schedule1, Schedule2
‒ Time
The panel brightness will change to the brightness set in
‒ Lamp
Adjust the panel brightness. A value closer to 100 makes the panel brighter.
Save power by turning the product off when no signal is received from any source.
― This function may not be supported depending on the model.
― This function does not operate if the display is in the standby mode.
― The product will automatically power off at a specified time. The time can be changed as required.
Choose how long the display will wait before turning off after no user interaction is detected.
Eco Sensor to Off. If the Eco Sensor is Off, it may not comply with energy standards.
Lamp at a specified time.
Picture
70