Installing The Body - Traxxas HIGH TRAIL TRX 4 SPORT 82044-4 Owner's Manual

Table of Contents

Advertisement

INSTALLING THE BODY

Your TRX-4 Sport includes an innovative latching system (patent pending)
for securing the body to the chassis (body clips are not required).
To remove the body for chassis access:
1. Reach beneath the front and rear inner fenders and pull the latches
toward the outside of the truck body to release them.
2. Push up on the latches to fully disengage the latches from the inner
fenders.
3. Lift the body straight up from the chassis. Lift the front and rear of the
body evenly or it may become difficult to remove.
To reinstall the body:
1. Position the body on the chassis. Align the left and right sides with the
rock sliders and the front and rear of the body with the bumpers.
2. Press down on the body at each latch location until the latches snap
into place.
TRAXXAS TQ 2.4GHz RADIO SYSTEM
1
2
Note: To keep the clipless system functioning properly, periodically inspect
and clean the latches in the body and the slots on the inner fenders. If dirt
and grime accumulate on these components, the clipless system will not
operate smoothly.
INSTALLING THE BATTERY PACK
WARNING: Do not pinch the battery wires
or connector.
Install the battery pack with the battery
wires facing the rear of the model. Swing
the battery hold down towards the chassis
and snap (lock) the end into the front hold-
down retainer.
Note: The battery hold down can be
rotated on its pivot to accommodate
different height battery packs.
THE TRAXXAS HIGH-CURRENT CONNECTOR
Your model is equipped with the Traxxas
High-Current Connector. Standard connectors
restrict current flow and are not capable of
delivering the power needed to maximize the
output of the XL-5 HV. The Traxxas connector's
gold-plated terminals with large contact surfaces ensure positive
current flow with the least amount of resistance. Secure, long-lasting,
and easy to grip, the Traxxas connector is engineered to extract all
the power your battery has to give.
Battery iD
Traxxas recommended
battery packs are equipped
with Traxxas Battery iD. This
exclusive feature allows
Traxxas battery chargers (sold
separately) to automatically
recognize connected battery
packs and optimize the
charge settings for the
battery. This eliminates
the need to worry over
charger settings and menus
for the easiest and safest
charging solution possible.
Visit Traxxas.com to learn
more about this feature and
available Traxxas iD chargers
and batteries.
To prevent loss of radio range
do not kink or cut the black wire,
do not bend or cut the metal tip,
and do not bend or cut the white
wire at the end of the metal tip.
No
No
No
Correct
4 4
TRX-4 SPORT • 15

Advertisement

Table of Contents
loading

Table of Contents