Sliding Window Installation - Danby DPA120DBAUGDB Owner's Manual

INSTALLATION INSTRUCTIONS

Sliding Window Installation

1. Cut the adhesive foam seals A and B to the
correct length for the window. Attach them to the
window sash and frame as shown.
2. Insert the assembled window slider kit into the
window opening.
3. Cut the non-adhesive foal seal C to match
the width of the window. Insert the foam seal
between the glass and the window frame to
prevent air and insects from getting into the
room.
4. Install the security bracket in the window frame
with the two provided screws.
5. Attach the window slider adapters to the holes in
the window slider kit.
Note: Do not over extend or bend the hose as this
will impede air fl ow.
1
A
2
3
4
5
5
B
A
B